The LED underwater light is installed underwater, and the contact with the water is very intensive. At the same time, it needs to use electricity, which has great requirements for the safe installation of the LED underwater light. Follow the following three steps to ensure your safe use.
First of all, manufacturers must take electrostatic measures during the production process.
Manufacturers of LED underwater lights need to ground the workbench and require workers to wear static clothing and anti-static bracelets to ensure that static electricity is prevented during the production process. If the company has conditions, it can install anti-static devices in the workshop, so that the anti-static effect is stronger and safer. Of course, with the different quality of LED underwater lights, the antistatic ability is also different. The antistatic ability of higher quality LED underwater lights will be better than ordinary quality products.
Second, a constant current power supply is required during the use of LED underwater lights.
When the LED underwater light is driven by a constant voltage, as the temperature of the LED chip increases during use, the current will also increase accordingly. The continuous increase of current will shorten the life of LED underwater light products, and in severe cases, it may burn down the LED underwater light. Therefore, the constant current power supply has irreplaceable advantages. When the constant current power supply is controlled, the temperature of the LED chip increases, and the voltage of the LED underwater lamp will decrease to achieve a balance. In this way, the impact on product life can be effectively avoided.
Finally, the sealing of LED underwater light products must be strictly controlled.
The close contact of LED products with water requires it to be better sealed to keep it from moisture and prevent water intrusion. If the sealing effect of the product is not good, then the LED underwater light will not only enter the water and affect the life of the product, but also cause safety problems and endanger human health.
