1. LED high-power underwater lights are used underwater and need to withstand a certain pressure. Generally made of stainless steel, 8-10MM tempered glass, high-quality waterproof joints, silicone rubber sealing ring, curved multi-angle refraction reinforced glass, waterproof, dustproof, anti-leakage, corrosion-resistant. In order to make the LED high-power underwater light achieve a good waterproof effect, the protection effect of the LED high-power underwater light should reach IP67 or above, and the lamp can be placed below 5 meters from the water surface. The optimum projection angle is 25°. The controller control achieves the synchronization effect and can be connected to the DMX console. Each unit has an individual address, and red, green, and blue light consist of three corresponding DMX channels.
2. There are two control methods: external control and internal control. The internal control does not require an external controller, and can be built in a variety of change modes (up to six), while the external control requires an external controller to achieve color changes. At present, most of the applications on the market are external control.
3. The LED high-power underwater light uses the best ultra-bright LED as the light source, and the bulb can emit light for 100,000 hours. Each high-power underwater light consists of 360 light sources (120 red lights, 120 blue lights, 120 green lights). Good light source materials make the lamp life longer and obtain the most satisfactory lighting effect.
4. The LED high-power underwater light adopts five-core wire to connect with the control system. The entire system includes a DMX controller, a distribution box, and lighting and power distribution that can be placed in the water. The whole light fixture is perfectly integrated.
5. The led high-power underwater light has a movable fixing clip, which can adjust the projection angle and position. The whole lamp is perfectly designed to effectively prevent the corrosion of bromine and chlorine.
