DMX512 series lamps (led underwater lights, led fountain lights, led underground lights, led wall washers) have now become indispensable decorative lighting fixtures for outdoor lighting projects. Its simple and flexible operation mode and powerful free editing function , which can ensure that users can edit the lighting effects that suit their needs in a short time. Nowadays, it is widely used in large-scale outdoor lighting projects such as urban landmark building lighting and light shows. So what should be paid attention to during the installation and use of DMX512 lamps?
Pay attention to the wiring of lamps: DMX512 lamps generally have two outgoing ways: a single five-core wire; two-core + four-core two outgoing wires, of which the two-core wire is the power line and the four-core is the signal line. The on-site installation must be carried out in strict accordance with the installation instructions provided by the manufacturer, so as to avoid wiring errors and burning the lamps.
Write address and debug: After the lamp is installed, use the controller or encoder of the lamp to write the address code for the lamp. When addressing, if it cannot be programmed or the addressing of a certain segment of lamps is unsuccessful, it is necessary to check whether the wiring of the lamps is correct, and then check whether the lamps themselves are damaged.
After the addressing is successful, disconnect the circuit, check whether the SD card is inserted properly, connect the wiring of the lamps, and turn on the power again to check whether the overall lighting effect is normal.
Waterproofing of lamps: Different from common monochrome LED outdoor lamps, DMX512 lamps have higher requirements for waterproofing. When installing, be sure to do a good job of waterproofing at the wiring port to prevent water from entering the lamp, affecting signal transmission or burning the lamp.
Outdoor lighting project is a comprehensive lighting project. When you have good products, you also need professional technical support. Chongqing Xinyuanhui Photoelectric Technology Co., Ltd. has many years of experience in production and on-site installation and debugging, and can provide you with a complete set of LED outdoor lighting engineering solutions.
