LED underwater light is a kind of installed under the water, simply refers to the light installed under the water, the appearance is small and exquisite, beautiful and generous, the appearance is similar to some buried lights, but there is an additional installation chassis, the chassis is Fix it with screws because the LED underwater light is used under the water and needs to bear a certain pressure, so it is generally made of stainless steel, 8-10MM tempered glass, high-quality waterproof joints, silicone rubber sealing rings, curved multi-angle refraction strengthened glass, Waterproof, dustproof, leakage-proof, corrosion-resistant.
1. LED underwater light is a kind of underwater lighting fixture with LED as light source, which is composed of red, green and blue mixed colors. It is the perfect choice for fountains, theme parks, exhibitions, commercial and artistic lighting. In order to make the LED underwater lights dissipate better, it is recommended to use the lights below the water surface.
2. The waterproof effect of the LED underwater light reaches IP65, because it has a good waterproof effect, the lamp can be placed below 5 meters from the water surface. The best projection angle is 25. The controller controls to achieve the synchronization effect, and can be connected to the DMX console. Each unit has its own address, and the red, green, and blue lights are composed of corresponding 3 DMX channels. There are two control methods, external control and internal control. The internal control does not need an external controller and can have multiple built-in changing modes (up to six), while the external control requires an external control controller to achieve color changes. The applications on the market are also Most of them are controlled externally.
3. The LED underwater light uses the best super bright LED as the light source, and the bulb can emit light for 100,000 hours. Each underwater light consists of 360 light sources (120 red lights, 120 blue lights, 120 green lights). Good light source materials make the lamps last longer and obtain the most satisfactory lighting effects.
4. The LED underwater light is connected to the control system with a five-core wire. The whole system includes a DMX controller, a distribution box, lamps and distribution that can be placed in the water. The whole lamp is perfectly combined.
5. The LED underwater light has a movable fixing clip, which can adjust the angle and position of the light projection. The entire lamp is perfectly designed to effectively prevent the erosion of bromine and chlorine.
