The musical fountain equipment is installed in artificial water, and the bottom or wall of the fountain pipe bracket is fixed by expansion bolts, and the water is treated after the equipment is installed and debugged. In recent years, musical fountains have been widely used in reservoirs, lakes, rivers and other waters. In these waters, there are two installation methods for musical fountains, which are installed with springs without water and with water.
1. Waterless installation means that by emptying, the dike or dam will be installed in the water bucket to separate the building area and the range without water. Various methods of installing fountains in these waters can be divided into no water and water according to the construction conditions.
Waterless installation refers to the method of using emptying, embankments or dams installed in the water area, and the water is stopped within the scope of the building area. Usually, when the water level changes of 0.15 microns or less, there is a fixed fountain installation, that is, a reinforced concrete foundation platform is poured in the fountain area, the steel structure is fixed on the platform, and the steel structure fountain equipment is installed. When the water level changes > 0.15 meters, it is necessary to lift the floating fountain to adapt to the dynamic change of the water level.
2. Install with water. The piling method is widely used in water installation, with the design that one end of the pile driver will be piled to the depth of the underwater soil layer, and the steel structure platform fixed at the position where the pile is properly raised is installed on the other end of the fountain equipment on the platform.
