Chongqing Xinyuanhui Optoelectronics Technology Co., Ltd
+8613752844338

Introduction of led underwater light

Jan 11, 2023

LED underwater lights are used under the water, you need to withstand some pressure, it is generally made of stainless steel, 8-10MM tempered glass, high-quality waterproof connectors, silicone rubber seals, curved multi-angle refraction glass, waterproof, dustproof , Leakage, corrosion-resistant.
1. LED underwater fountain light is a kind of LED as a light source, composed of red, green, blue, yellow, white and other colors mixed color changes underwater lighting. Perfect for fountains, theme parks, trade shows, business and art lighting. In order to make the LED underwater lights better heat dissipation, it is recommended that the best use of the lamp on the surface of the water.
2. RGB LED underwater lights waterproof up to IP68, because of good waterproof effect, the lighting can be placed 5 meters below the surface, or withstand deeper water pressure. The best angle is 30 degrees. Controller to achieve the synchronization effect, and can access the DMX console, each unit individually set up an address, red, green and blue light from the corresponding three DMX path. External control and internal control of two kinds of control, internal control without external controller can be built a variety of changes in mode, and external control is to configure the external controller to achieve color change, the market is also outside the majority of control applications.


3. For led underwater pool light, the best choose light source is LED, thus the lamp can glow 100,000 hours. Each underwater light according to the size of the power by a number of LED light source. Good light source material makes the lamp life longer, and obtain the most satisfactory lighting effect.
4. The ip68 LED underwater lights are connected to the control system using a three-wire shielded cable. The entire system consists of one or more DMX controllers, one or more power distribution boxes, and lamps and fittings that can be placed in the water. The perfect combination of lamps.
5. LED underwater lights require the use of 304 stainless steel, there is a fixed clip activities, adjustable cast angle, position. The entire lamp design is perfect, effectively prevent the erosion of bromine and chlorine.