The installation of pool lights led underwater rgb needs to pay attention to the following points:
1. For rgb underwater led light,it is advisable to reserve a cassette in the base layer or leveling layer of the pool wall (bottom).
2. The cassette is in the structural layer, and cement-based penetrating crystalline waterproof paint should be brushed on five sides, and the cassette should be fixed and dense in the leveling layer.
3. After the calendering and internal corners are made into arcs, the five sides should be brushed with the same type of waterproof coating as the large sides.
4. Flexible sealing materials should be used to insert and fill densely and evenly at the crossing of electric wires and pipes.
5.The secondary grouting of fine stone concrete (with waterproofing agent) should be used in the cassette.
6. The end of the waterproof layer, the end of the underwater pool light submersible led and the finishing layer should be filled with flexible sealing materials densely and evenly.
