Compared with traditional color changing underwater lights, LED fountain underwater lights are more energy-saving and environmentally friendly, and the lights are varied and decorative, and are widely used in various landscape lighting systems. However, as a manufacturer of LED lamps, some problems in the installation of LED fountain underwater lamps need special attention.
1. Before installing the LED fountain rgbw underwater light, the power supply must be cut off. This is the first step in the installation of all electrical equipment and is the basis for safe operation.
2. In order to make the LED fountain underwater light better dissipate heat, it is recommended to use the light below the water surface.
3. In order to make the LED fountain underwater light achieve a good waterproof effect, the protection effect of the LED fountain underwater light should reach IP67 or above, and the lamp can be placed below 5 meters from the water surface.
4. Fix the installation position of the LED fountain underwater light. The chassis can be fixed with screws. Generally, the connection head of the underwater lamp of the fountain is preferably on the water surface, and the power connection should be waterproofed.
5. The control system is designed by engineers. When used under normal working conditions, the color changing effect can achieve the optimal LED life. Exceeding these ranges or conditions or working at the upper limit of these conditions for a long time will further reduce the life of the LED. In extreme cases, the internal light source assembly can fail.
6. Please handle with care when installing lamps, so as not to damage the lamps.
If you have any questions about LED underwater lights, you can consult Chongqing Xinyuanhui Optoelectronics Technology Co., Ltd.; we will be your best choice for purchasing underwater lights.
