![[[smallImgAlt]]](/uploads/202231651/fountain-injectors17488964830.jpg)
fountain injectors
This series of fountain nozzles are the most widely used in the world of water feature fountains. The output diameter varies with the threaded connector (male or external thread). They are manufactured from stainless steel or calibrated brass piping. They are also fitted with one or two inner jet cut-offs (depending on model) that ensure the optimal quality of the water jet up to the heights shown on the technical data sheet.. Architectural water feature with lance jet fountain nozzlesThey also have a smooth ball joint that can reach a maximum slope of 20°, thereby enabling parabolic jets to be designed with no additional parts. Small and medium sizes (4 to 10 mm outlet) are suitable for indoor architectural fountains, while 10 to 19 mm diameter outlets are most suitable for outdoor use.
These fountain nozzles produce a crystalline feature effect in the fountain jets and ensure that its flow inside the jet pipe is laminar. In order to prevent turbulence, all nozzles in the series are fitted with jet disturbers to “calm” the water flow. The aim is to ensure that the water jet is transparent, which means there must be no air inside it. The most representative jet produced by this jet pipe is the crystal-clear jet.
| NO. | Connectins | Pressure(Kpa) | Dis charge(M^3/H) | Height(M) | Diameter(M) |
| XYH2110 | DN15 | 15-65 | 0.3-1.5 | 1-4 | Ray state |
| XYH2111 | DN20 | 15-80 | 1-3 | 1-5 | |
| XYH2112 | DN25 | 50-100 | 2-4 | 3-6 | |
| XYH2113 | DN40 | 50-150 | 3-6 | 3-7 | |
| XYH2114 | DN50 | 50-200 | 5-8 | 3-8 | |
| XYH2115 | DN65 | 70-250 | 10-25 | 3.5-15 | |
| XYH2116 | DN80 | 70-330 | 10-40 | 3.5-20 | |
| XYH2117 | DN100 | 80-400 | 10-60 | 3.5-25 |
Fountain nozzle of the advantage:
1. Adjustable straight spray nozzle with single jet, direct spray .
2. The water pillar is crystal clear, crisp line and smooth.
3. The jet line can be adjusted in the range of ±10, with a flexible install way and can form various water shapes.
4. The adjustable straight nozzle can be widely used in fountains in any occasions, and is necessary nozzles for music fountain.
5. It has a ball-shaped connector which can be adjusted 15 along vertical direction.
6. The adjustable straight nozzles can be combined into different spraying results.
7. It will have a better effect when working with underwater lights.
Hot Tags: fountain injectors, suppliers, manufacturers, factory, high quality
